Application Methods:
First, completely shut out the solar panels or put it down on the desktop. Then press the button for 3 seconds to start the lamp. Enter the firstoperating mode after starting. Each press of the button will change theoperating modes with the lights flickering at the same time. The circulatory switchover of operating modes is as follows:
1.Micro - mode + Induction mode
When someone comes, the sensor triggers circuit to start high light; the light will dim after someone leaving for 30 seconds (Firstly recommended to use)
2.Induction mode
When someone comes, the sensor (triggers cirouit to start high light; the light will be turned off after someone leaving for 30 seconds (Use in the places with short lighting time)
3.Warning flash mode
When someone comes over, the sensortriggers to activate the warning flash.
the light will be turned off after someone leaving for 30 seconds
4.Shutdown.